Introduction: Welcome to the ARMOR 4 two-wire vehicle installation guide. In this video, Keith Bunch will guide you through the installation process. The kit includes:
- ARMOR 4 device
- Two-wire harness
Installation Steps:
Documentation:
- Take a photograph of the ARMOR device alongside the vehicle identification sticker located inside the driver’s door. This will be important for device registration.
Preparation:
- Locate a source of 12 volts continuous voltage and a suitable ground connection. For this installation, we have chosen to connect directly to the vehicle’s battery.
Device Installation:
- Connect the two-wire harness to the ARMOR 4 device.
- Ensure all connections are secure. The ARMOR 4 device is IP67 rated, making it waterproof and suitable for external mounting.
Testing Connectivity and Utilization:
- Visit ARMOR Data Connectivity Checkto verify the device's connectivity and data reporting. You should see three check marks indicating:
- Cellular connectivity.
- Data reported in the last 4 hours.
- Utilization reported in the last 4 hours.
- Visit ARMOR Data Connectivity Checkto verify the device's connectivity and data reporting. You should see three check marks indicating:
Register the Device:
- Email the previously taken photograph of the device and vehicle sticker to [email protected] to complete the registration process.
Conclusion: Thank you for choosing ARMOR. For additional support or questions, please visit our website at ARMORdata.com or contact our support team. Keith Bunch and the ARMOR team appreciate your trust and are here to assist you with any further inquiries.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article