OEM wire harness - 6-wire vs 5-wire explained

Modified on Wed, 7 Aug at 12:35 PM


Introduction
Welcome to the video! Keith here, and today we'll be walking through the detail and differences between the ARMOR 2+ (6-wire) and ARMOR 4 OEM (5-wire) harnesses.


Overview of ARMOR 2+ 6 Wire Harness
In this section, we'll discuss the ARMOR 2+ 6 wire harness. The wiring setup is as follows:

  • Orange: Positive wire
  • Green: Negative wire
  • Black & Brown: These are both connected in the common ground wago.
  • Red & Yellow: These wires are used for the pump and vacuum motor.


Overview of ARMOR 4 OEM Harness
Now, let's take a look at the ARMOR 4 OEM harness. This harness is similar, but with a slight difference:

  • Orange: Positive wire
  • Green: Negative wire
  • Red & Yellow: Used for the pump and vacuum motor
  • Brown: The key difference with the ARMOR 4 OEM harness is the brown wire, which is not in use. To manage this, simply wrap the brown wire with electrical tape and tuck it away.


Conclusion
And there you have it—the breakdown of the different harnesses. Now you know the key differences and how to manage the unused wire in the ARMOR 4 OEM harness. Thanks for watching!


-- ARMOR Support

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article